Industrial Cable Raceways & Wireways Manufacturer in Delhi NCR
- Types: Enclosed sheet metal electrical wireways, floor trunking, and wall-mounted cable raceways
- Material: Pre-Galvanized (GI), Cold-Rolled CRCA, and Stainless Steel (SS304/SS316)
- Covers: Screw-fix or snap-on removable covers with continuous earthing connections
- Protection: IP40 to IP54 ingress protection against dust, rodents, and mechanical impacts
Product Overview & Engineering
What is an Industrial Cable Raceway? An industrial cable raceway (also known as electrical wireway, trunking channel, or cable duct) is an enclosed sheet metal channel with removable covers designed to route, conceal, and protect electrical power lines, control cables, and IT data networking wires along floors, walls, and ceilings. By fully enclosing cables inside grounded steel, it prevents mechanical impact damage, dust accumulation, and rodent chewing.
Where is it Used? Common across commercial IT complexes in Cyber City Gurgaon and Noida, manufacturing shop floors in Bawana and Mundka, and solar power substations across North India.
Key Benefits & Advantages:
• Full mechanical and rodent protection prevents severed lines and short circuits.
• Internal barrier dividers separate high-voltage power lines from sensitive data lines to prevent electrical noise.
• Continuous removable top covers allow new cables to be laid in seconds without pulling wires through pipes.
• All-steel grounded construction prevents electrical shock hazards and complies with IS 732 wiring codes.
How Brezz India Manufactures This System: Raceways are roll-formed and CNC-notched from prime pre-galvanized or CRCA steel coils in our Mundka factory. Cover plates are press-bent with snug-fitting return lips. All junction boxes, elbows, and couplers are stamped on dedicated dies to ensure perfect alignment. Coated with high-durability electrostatic powder coating.
How We Install on Site: Base channels are anchored to walls or floors with expansion screws, internal partition dividers are clipped in, cables are laid in place, earthing continuity jumpers are connected, and covers are snapped or screwed down.
Raceways Manufacturers in Delhi
Brezz India Storage Systems is an established raceways manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial raceways utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Raceways Suppliers in Delhi NCR
As leading raceways suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Raceways Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable raceways wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Raceways B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹280 – ₹850 per running meter | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Material Specifications | Pre-Galvanized (GI) Sheet, CRCA Steel, Hot-Dip Galvanized, Stainless Steel |
| Sheet Metal Gauge | 14 Gauge (2.0 mm), 16 Gauge (1.6 mm), 18 Gauge (1.2 mm), 20 Gauge (1.0 mm) |
| Standard Widths | 50 mm, 75 mm, 100 mm, 150 mm, 200 mm, 300 mm, 400 mm, 600 mm |
| Standard Depths (Heights) | 25 mm, 38 mm, 50 mm, 75 mm, 100 mm |
| Standard Length | 2,500 mm (2.5 meters) per section |
| Internal Compartments | Single, 2-Compartment, or 3-Compartment (segregating Power, Data, and Fire Alarm lines) |
| Cover Fastening | Snap-on tool-free cover or captive M5 zinc-plated machine screws on 300 mm centers |
| Surface Treatment | 7-Tank Pre-Treatment + High-Impact Electrostatic Powder Coating or Pre-Galvanized |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| Floor Trunking Raceway (150x50 mm / 3 Compartment) | Segregated Power, Data & Telecom cables | Corporate office underfloor cabling & workstation power delivery |
| Industrial Wall Raceway (200x75 mm / Heavy GI) | Heavy industrial control & motor cables | Manufacturing plant walls, machine wiring & panel feeds |
| Substation Heavy Duty Raceway (300x100 mm) | High-voltage armoured power cables | Power distribution substations, solar plants & data centers |
How We Manufacture & Install Raceways
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Raceways FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.