Hand Pallet Truck (HPT) Manufacturer in Delhi NCR
- Capacity: 2,500 kg (2.5 Ton), 3,000 kg (3.0 Ton), and 5,000 kg (5.0 Ton) models
- Hydraulic pump: One-piece leak-proof cast hydraulic cylinder with hard chrome piston rod
- Forks: High-tensile press-formed C-channel steel with reinforced entry guide rollers
- Steering: Ergonomic spring-loaded 3-position fingertip control lever (Lift, Neutral, Lower)
Product Overview & Engineering
What is a Hand Pallet Truck (HPT)? A Hand Pallet Truck (also known as a hydraulic pallet jack or pallet trolley) is an indispensable manual material handling tool designed to lift and transport palletized loads up to 5,000 kg across warehouse floors. Utilizing a hydraulic piston pump operated by pumping the steering handle, it effortlessly lifts pallets off the ground so a single operator can pull them smoothly across aisles.
Where is it Used? Essential equipment in every warehouse, manufacturing plant, transport godown, and freight forwarding hub across Delhi NCR, Haryana, and Uttar Pradesh.
Key Benefits & Advantages:
• One-piece cast hydraulic pump with overload relief valve ensures zero hydraulic oil leakage.
• Heavy press-formed channel forks with tapered nose rollers glide effortlessly into pallet pockets.
• Dual tandem load rollers distribute weight evenly over floor expansion joints and thresholds.
• 210-degree steering arc provides exceptional maneuverability inside tight truck containers.
How Brezz India Manufactures This System: Fork chassis is formed from heavy-gauge structural steel sheet on hydraulic CNC brake presses in our Mundka plant. Torsion-resistant cross-shafts are welded for structural rigidity. Hydraulic pumps are assembled with hard chrome-plated ground pistons and imported polyurethane seals. Finished with high-durability safety yellow or orange powder coating.
How We Install on Site: Delivered 100% factory-assembled, tested, and pre-filled with hydraulic oil, ready for immediate operation right out of the delivery vehicle.
Hand Pallet Truck Manufacturers in Delhi
Brezz India Storage Systems is an established hand pallet truck manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial hand pallet truck utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Hand Pallet Truck Suppliers in Delhi NCR
As leading hand pallet truck suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Hand Pallet Truck Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable hand pallet truck wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Hand Pallet Truck B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹12,500 – ₹28,000 per unit | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Rated Load Capacities | 2,500 kg (2.5T), 3,000 kg (3.0T), 5,000 kg (5.0T) |
| Fork Length | 1,150 mm (standard) / 1,220 mm / 1,500 mm / 1,800 mm custom lengths |
| Overall Fork Width | 550 mm (narrow Euro pallets) / 685 mm (standard Indian/American pallets) |
| Lowered Fork Height | 85 mm (standard) / 75 mm (low-profile option) |
| Maximum Lift Height | 195 mm to 200 mm |
| Hydraulic Cylinder | Single-piece leak-proof cast pump with overload bypass safety valve |
| Steering / Load Wheels | 180x50 mm steering wheels; 80x70 mm dual tandem load rollers (PU or Nylon) |
| Turning Radius | 1,266 mm to 1,336 mm (210° wide steering arc) |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| Standard 2.5 Ton HPT (685x1150 mm) | 2,500 kg | General warehouse pallet movement, 3PL hubs & e-commerce godowns |
| Heavy Duty 3.0 Ton HPT (685x1150 mm) | 3,000 kg | Heavy industrial manufacturing, chemical drums & metal parts |
| Narrow Fork 2.5 Ton HPT (550x1150 mm) | 2,500 kg | Euro pallets (1200x800 mm) & tight container loading |
| Extra Heavy 5.0 Ton HPT | 5,000 kg | Heavy machine transport, steel casting dies & coil handling |
How We Manufacture & Install Hand Pallet Truck
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Hand Pallet Truck FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.