Manual Hydraulic Stacker Manufacturer in Delhi NCR
- Capacity: 1,000 kg (1 Ton) to 2,000 kg (2 Ton) load rating
- Operation: Dual pumping options via ergonomic hand tiller or foot pedal pump
- Mast: Heavy C-section steel mast with high-strength roller leaf chains
- Forks: Adjustable forged steel forks to fit varied pallet widths
Product Overview & Engineering
What is a Manual Hydraulic Stacker? A manual hydraulic stacker is an economical, rugged vertical lifting unit operated via manual hydraulic hand pumping or foot pedal actuation. Designed for low to medium-frequency warehouse stacking and truck loading up to 3 meters height, it requires zero electricity or battery charging, making it completely maintenance-free and ready to work anywhere.
Where is it Used? Common across transport godowns in Transport Nagar, small fabrication workshops in Mayapuri and Bawana, and warehouse stockrooms across Delhi NCR.
Key Benefits & Advantages:
• Zero electrical dependencies—no charging downtime or battery replacement costs.
• Dual lifting controls: use the hand tiller for comfort or the foot pedal for rapid pumping.
• Proportional hand release lever provides gentle, controlled pallet lowering without shock.
• Protective steel mesh screen protects the operator from accidental load contact.
How Brezz India Manufactures This System: Masts are fabricated from heavy-section structural steel C-channels in our Mundka plant. The hydraulic cylinder is fitted with imported double-lip polyurethane oil seals. Lifting leaf chains are pull-tested for 4x safety factor. All units are finished with 80-micron powder coating.
How We Install on Site: Delivered fully assembled, tested, and pre-filled with hydraulic oil, ready for immediate work upon arrival.
Manual Stacker Manufacturers in Delhi
Brezz India Storage Systems is an established manual stacker manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial manual stacker utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Manual Stacker Suppliers in Delhi NCR
As leading manual stacker suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Manual Stacker Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable manual stacker wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Manual Stacker B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹24,000 – ₹52,000 per unit | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Lifting Capacity | 1,000 kg (1.0T), 1,500 kg (1.5T), 2,000 kg (2.0T) |
| Maximum Lifting Heights | 1,600 mm (single mast) / 2,500 mm / 3,000 mm (duplex telescopic mast) |
| Lifting Operation | Dual Manual Operation (Pumping hand tiller or quick-lift foot pedal) |
| Lowering Control | Proportional hand release lever for controlled descent speed |
| Fork Dimensions | 1,000 mm to 1,150 mm length; 300 mm to 750 mm adjustable outer width |
| Chassis Construction | Heavy-gauge welded structural steel plate with protective mesh screen |
| Wheels & Rollers | Heavy-duty Nylon or PU wheels with foot-guard protective shields |
| Turning Radius | 1,350 mm to 1,450 mm |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| 1.0 Ton / 1.6m Single Mast Stacker | 1,000 kg | Loading & unloading Tata Ace / pickup trucks and 1-tier racking |
| 1.5 Ton / 2.5m Duplex Stacker | 1,500 kg | Medium warehouse rack pallet stacking & machine die loading |
| 2.0 Ton / 3.0m Heavy Duty Stacker | 2,000 kg | Heavy manufacturing component lifting & container unloading |
How We Manufacture & Install Manual Stacker
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Manual Stacker FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.