Very Narrow Aisle (VNA) Pallet Racking Manufacturer in Delhi NCR
- Aisle width: Operates in aisles as narrow as 1.6 to 1.8 meters
- Height capacity: Engineered for vertical heights up to 15 meters
- Space efficiency: Increases storage capacity by 45% over standard selective racks
- Forklift: Operated by specialized turret trucks or wire-guided reach trucks
Product Overview & Engineering
What is Very Narrow Aisle (VNA) Racking? Very Narrow Aisle racking shrinks warehouse forklift travel aisles from standard 3.8 meters down to just 1.6 to 1.8 meters while utilizing vertical warehouse ceiling heights up to 15 meters. Specialized turret trucks or articulated forklifts rotate their fork carriage 90 degrees left or right to pick and place pallets without turning the vehicle chassis.
Where is it Used? Widely adopted in modern high-cube logistics centers along the KMP Expressway, Bilaspur, Luhari, and Greater Noida where land cost is high and warehouses must squeeze maximum pallet density from their footprint.
Key Benefits & Advantages:
• Recovers up to 45% to 50% floor space compared to wide-aisle selective racking.
• Retains 100% individual pallet selectivity—every SKU is accessible at all times.
• Allows rapid simultaneous horizontal travel and vertical lifting by turret trucks.
• Maximizes vertical ceiling cube utilization up to 15 meters.
How Brezz India Manufactures This System: Because VNA systems reach exceptional heights with narrow tolerances, we roll-form heavy 100 mm to 140 mm column profiles from high-yield IS 2062 Grade steel with tight dimensional consistency. Guide rails (ISMC 100 or 100x50 mm structural angle) are precision-fabricated with lead-in entry funnels.
How We Install on Site: Laser surveying is mandatory to verify floor superflatness. Heavy reinforced base plates are chemical-anchored with M16/M20 studs, vertical upright plumbness is calibrated to within 1/1000 tolerance, and heavy continuous floor guide rails are anchored to steer turret trucks.
Narrow Aisle Racking Manufacturers in Delhi
Brezz India Storage Systems is an established narrow aisle racking manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial narrow aisle racking utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Narrow Aisle Racking Suppliers in Delhi NCR
As leading narrow aisle racking suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Narrow Aisle Racking Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable narrow aisle racking wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Narrow Aisle Racking B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹2,400 – ₹5,500 per pallet position | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Operating Aisle Width | 1,600 mm to 1,900 mm (depending on truck model) |
| System Heights | Up to 15,000 mm (15 meters) continuous uprights |
| Guidance Systems | Floor-mounted structural angle/channel guide rails OR In-floor inductive wire guidance |
| Pallet Selectivity | 100% immediate individual pallet access |
| Upright Column Profiles | 100x70 mm, 120x95 mm, 140x95 mm heavy roll-formed profiles (2.5 to 3.2 mm steel) |
| Load Capacity per Level | 1,000 kg to 3,500 kg per beam level |
| Floor Tolerance Norms | Conforms to DIN 18202 / TR34 Superflat floor criteria |
| Finish | 7-Tank Pre-Treatment + High-Durability Electrostatic Powder Coating |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| 8m to 10m VNA System | 2,500 kg / level | Standard warehouse height extension |
| 11m to 15m High-Bay VNA | 3,500 kg / level | Large 3PL logistics parks & modern high-cube fulfillment |
How We Manufacture & Install Narrow Aisle Racking
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Narrow Aisle Racking FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.